Graco E-Flo, Руководство по установке

Страница: 15 / 28

Pump Location
311592Z 15
Pump Location
Environmental Conditions
See Technical Data , page 26, for recommended ambi-
ent temperature range and environmental conditions.
Clearance
When selecting the location for the pump, keep the fol-
lowing in mind:
• There must be sufficient space on all sides of the
pump for installation, operator access, repair, and
air circulation. See
Dimensions , page 23. See
manual 311593 for maintenance requirements.
• Ensure that the mounting surface and mounting
hardware are strong enough to support the weight
of the equipment, fluid, hoses, and stress caused
during operation.
• There must be a pump disable switch within easy
reach of the pump. The Secure Disable switch on
the Local Control Box Accessory provides this func-
tion. See page 21.
15H884 Floor Stand
Floor Stand 15H884 is available as an option. See
406638 for assembly and mounting instructions.
Connect Fluid Lines
See F
IG
. 7. The fluid manifolds are secured to the
pumps with 1-1/2 in. clamps and sanitary gaskets (CG).
Manifolds can be oriented in either direction. Connect
the fluid line (R) to the manifold (MF) using 2 in. clamps
and sanitary gaskets (SC). Graco recommends a mini-
mum suction tube size of 1-1/4 in. (31.8 mm). Optional
fittings are available. See T
ABLE
3.
Table 3: Fluid Fittings, Clamps, and Sanitary
Gaskets
Part No. Description
15J423 Converts 2 in. sanitary to 2 in. npt
adapter
15J422 Converts 1-1/2 in. sanitary to 1-1/2 in. npt
adapter
15J639 Converts 2 in. sanitary to 1-1/2 in. sani-
tary reducer adapter
120350 1-1/2 in. Sanitary Clamp
120620 2 in. Sanitary Clamp
120631 2 in. Sanitary Gasket, PTFE
680454 1-1/2 in. Sanitary Gasket, Virgin PTFE
120351 1-1/2 in. Sanitary Gasket, PTFE
encapsulated fluoroelastomer
F
IG
. 7. Fluid Connection (Pump Inlet, E-Flo 4000
Shown)
ti8744b
R
SC
MF
CG
Use 120351 Gaskets at these locations.
1
1