Operation
Flow
Flow
Flow Mode
Mode
Mode
When in flow mode, the motor will maintain a
constant speed regardless of the fluid pressure, up
to the pump’s maximum working pressure. See
Technical Data, page 25
.
1.
Turn the Control Knob (N) fully counterclockwise
to 0.
2.
Pull the Mode Select switch (M) out to set. Turn
the switch to Flow
. Push the switch in to
lock.
3.
The amount of flow is determined by the cycle
rate set with the Control Knob (N). The knob’s
scale (0–10) corresponds to a cycle adjustment
range of 0-30 cycles per minute. Turn the Control
Knob (N) clockwise to increase the cycle rate
(flow), or counterclockwise to decrease the cycle
rate (flow).
Figure 13 Flow Mode
3A2526L
15
All manuals and user guides at all-guides.com
