Operation
Basic
Basic
Basic Motor
Motor
Motor Operation
Operation
Operation
The basic motor has three operating modes:
• Pressure Mode
• Pressure Mode with Integrated Runaway
Protection
• Flow Mode
NOTE:
NOTE:
NOTE: Before changing from one mode to another,
turn the Control Knob (N) fully counterclockwise to 0.
Pressure
Pressure
Pressure Mode
Mode
Mode
When in pressure mode, the motor will adjust the
speed to maintain a constant fluid pressure.
1.
Turn the Control Knob (N) fully counterclockwise
to 0.
2.
Pull the Mode Select switch (M) out to set. Turn
the switch to Pressure
. Push the switch in
to lock.
3.
Pull the Control Knob (N) out to set. Turn the
knob clockwise to increase the pressure, or
counterclockwise to decrease the pressure.
Push the knob in to lock.
Figure 11 Pressure Mode
Pressure
Pressure
Pressure Mode
Mode
Mode with
with
with Integrated
Integrated
Integrated Runaway
Runaway
Runaway
Protection
Protection
Protection
In pressure mode with integrated runaway protection,
the motor will adjust the speed to maintain a constant
fluid pressure, but will shut down if it exceeds a
user-set speed.
1.
Turn the Control Knob (N) fully counterclockwise
to 0.
2.
Pull the Mode Select switch (M) out to set. In
the Runaway
range, turn the switch to the
desired shutdown speed in cycles per minute (5,
10, 15, 20, or 25). Push the switch in to lock.
3.
Pull the Control Knob (N) out to set. Turn the
knob clockwise to increase the pressure, or
counterclockwise to decrease the pressure.
Push the knob in to lock.
NOTE:
NOTE:
NOTE: The motor will shut down if the selected
speed is exceeded for 5 cycles. To reset, turn the
Control Knob (N) fully counterclockwise to 0, then
turn to the desired pressure.
Figure 12 Pressure Mode with Integrated Runaway
Protection
14
3A2526L
All manuals and user guides at all-guides.com
