Installation
6
3A3005C
Grounding
•
Pump:
Use ground wire and clamp as shown in
. 1. Order Grounding Wire and Clamp Kit,
Part No. 222011.
•
Hydraulic Hoses and Fluid Outlet Hoses:
Use electrically conductive hoses only.
•
Hydraulic Power Supply:
Follow manufac-
turer’s recommendations.
•
Flushing Pails:
When flushing, only use metal,
grounded pails. Make firm, metal-to-metal con-
tact between the metal part of the dispense
valve and the pail. Use lowest possible pres-
sure.
To ground pump:
1.
Remove ground screw (Z) and insert through eye of
ring terminal at end of ground wire.
2.
Fasten ground screw back onto pump and tighten
securely.
3.
Connect other end of wire to the frame of the truck.
The equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. Grounding provides an escape wire
for the electric current.
F
IG
. 1
Z
