Graco DuoLogic2, Руководство по установке

Страница: 7 / 7

20
CarSeat.se
35. Put seat on top of base. Thread red
triangle marked "G" towards track of base.
36. Please note indicator (A) is currently red.
Now, push down seat into base......
37. ..... Put seat in position "I". Listen for an
an audible "click". Indicator should now
show green (A).
38. NOTE!! CHECK THOROUGHLY THAT SEAT
HAS LOCKED INTO BASE. IT SHOULD NOT BE
POSSIBLE TO LIFT SEAT FROM THE BASE!
41. Check carefully that safety indicator is
showing green (A). Make sure seat can't be
lifted from base. Don't use your car seat if
you're unsure of installation, instead contact
nearest reseller.
42. Make sure child is securely fastened in car
seat. Harness should be tight around child.
Two adult fingers should fit between harness
and child. An incorrectly installed car seat
could mean danger of life in a collision.
39. Adjust angle with handle in front of seat
(see A, picture 1). Push down head protector
against seat. 40. Position "I" is used from newborn. Position
"II" and "III" are for children weighing more
than 9 kg. (20 lbs)
INSTALLATION MANUAL INSTALLATION MANUAL
Seat in place
Safety