Graco CLASSIC RIDE 50, Инструкция по эксплуатации

Страница: 12 / 92

REAR-FACING INSTALLATION WITH LATCH
12
1
7
6
5
4
3
2
LATCH belt must be routed through opening in
child restraint for rear-facing mode.
(see page 29, fig. d
Belt must lay flat and not be twisted.
Adjust child restraint to recline position
(see fig. a and page 25, fig. g 0LACE
rear-facing
ONVEHICLESEATEQUIPPEDWITH
LATCH anchors.
For ease of installation, extend LATCH belt to its
maximum length.
(OOKCONNECTORSTOVEHICLELOWERANCHORS
(fig. b) . Pull connectors to be sure they are
securely attached to the anchor points. (fig. c) .
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINT
while pulling LATCH adjustment belt. (fig. d) .
0ULLFRONTTOBACKANDLEFTTORIGHTATBELTPATH
TOCHECKFORSECUREINSTALLATION
(fig. e)
4HE
CHILDRESTRAINTSHOULDNOTMOVESIDETOSIDEOR
FORWARDMORETHANINCHCM
#HECKTHATTHELOWERANCHORAGEBELTSTAYS
tight and does not slip from the tightened
position. If it does not stay tight, try another
SEATINGPOSITIONORCONTACT#USTOMER3ERVICE
#HECKLEVELINDICATORONCHILDRESTRAINT
Vehicle must BEONLEVELGROUNDANDCHILDIN
CHILDRESTRAINTWHENCHECKINGLEVELINDICATOR
Ball MUST be entirely in green zone (fig. f) . If
necessary, place rolled towels under child
RESTRAINTATVEHICLESEATCREASEUNTILENTIREBALL
ISINGREENZONE4HENRECHECKLEVELINDICATOR
DO NOT use tether rear-facing
4ETHER
must
BESTOREDSEEh4ETHER3TORAGEvPAGE
0ERFORMTHISTESTEVERYTIMEYOUDRIVEWITHYOUR
child.