Graco 95G104, Руководство пользователя

Страница: 29 / 50

Pro Model Setup
3A8848A 29
• An LED flashes under
either MM when pro -
gramming minutes
OR SS when pro -
gramming seconds.
• In SETUP MODE, the
number displayed in
the first field, on the
left side of display
blinks, indicating the
device is ready to pro -
gram the ON Time minutes.
• The total amount of ON Time cannot
exceed 30 minutes. If a value greater
than 30 minutes is entered, the RED
alarm LED lights and the value must
be updated.
If this time does not meet the application needs,
contact Graco Customer Support.
Programming ON Time
NOTE:
When programming a time of less than 10 min -
utes a leading zero must be programmed in the first
number field and then press the ENTER button to save
the zero selection.
1. To set the ON Time use the
UP or DOWN ARROW button
to scroll through numerals 0
to 5 until the desired number
appears in the first MM (min -
utes) field.
2. Press the ENTER button to lock in the
selection. The next MM number field to
the right flashes indicating it is ready for
programming.
3. Use the UP or DOWN
ARROW button to scroll
through numerals 0 to 9 until
the desired number appears
in the second MM number
field.
4. Press the ENTER button to lock in the
selection.
The next number field to the right
flashes and the LED lights under SS; indicating it is
ready to program the seconds fields.
5. Repeat steps 1 - 4 to set the SS (seconds) fields.
6. After pressing the ENTER button to set
the last SS field, all the programmed ON
Time information is saved.
The G5 automatically switches to the OFF Time
SETUP MODE.
OFF Time
• The LED next to the clock in the OFF
field lights, indicating that the OFF
Time parameters are being set.
• OFF Time is set in Hours and Minutes
(HH: MM).
• An LED flashes under
either HH when pro -
gramming hours OR
MM when program -
ming minutes.
• In SETUP MODE the
number displayed in
the first field, on the
left side of display
blinks, indicating the
device is ready to pro -
gram the OFF Time hours.
• The total amount of OFF Time must be
at least twice as long as the pro -
grammed ON Time. If a value less than
twice the ON Time is entered, the RED
alarm LED lights and the value must be updated.
If this time does not meet the application needs,
contact Graco Customer Support.
Programming OFF Time
NOTE:
When programming a time of less than 10
hours a leading zero must be programmed in the first
number field and then press the ENTER button to save
the zero selection.
1. To set the OFF Time use the
UP or DOWN ARROW button
to scroll through numerals 0
to 9 until the desired number
appears in the first HH (hour)
field.
OR
OR