Graco 3A8693C, Инструкция по эксплуатации

Страница: 15 / 34

Troubleshooting
3A8693C 15
Equipment leaks air
externally.
Air valve cover (2) or air valve cover screws (3)
are loose.
Tighten screws. See page 21.
Air valve gasket (4) or air cover gasket (22) is
damaged.
Inspect; replace. See pages 18 to 21.
Air cover screws (3) are loose. Tighten screws. See page 21.
Equipment leaks fluid
externally from the joint
between the fluid cover
and manifold.
Loose joint between manifolds (102, 103) and
fluid cover (101).
Tighten manifold bolts (120), see
Torque Sequence , page 29.
Damaged gaskets (112, 114). Replace gaskets (112, 114), see page
16.
Equipment leaks fluid
externally from the joint
between the center
manifold and manifold.
Worn or damaged gaskets (121). Replace gaskets (121), see page 16.
Gasket (121) not installed properly.
Manifold (102 or 103) not fully installed at joint
to the center manifold (113).
Thoroughly grease the gasket (121)
and the inner diameter of the manifold
(102 or 103) before assembling
manifold.
Ensure the gasket (121) is fully
installed on the outer diameter of the
center manifold (113).
Ensure the manifold (102 or 103) is
properly aligned to the equipment.
Ensure the center manifold (113) and
manifold (102 or 103) are fully
connected at the joint.
See Reassemble Check Valves ,
page 16.
Problem Cause Solution