5
309446
Setup
4.
Insert the assembled connecting rod into the
barrel. The open section of the plunger is now
visible inside the barrel. Ensure that the clamp
lever (3) is inserted. See Fig. 5.
Fig. 5
TI1700A
3
5.
Screw the locking nut (2) and the plastic grip (1)
onto the connecting rod. The hand lever grease
gun is now ready for use. See Fig. 6.
Fig. 6
TI1700A
1
2
Operation
Filling the Grease Gun with the Loader Valve
1.
Follow the procedure on page 4, Modifying the
Grease Gun for use with the Grease Gun Loader
Valve.
2.
Attach filler hose to loader valve.
3.
Draw back grease tube handle.
4.
Press clamping lever to release plunger rod into
gun.
5.
Fill grease tube until full.
6.
Push ball on loader valve to release trapped air.
7.
Grease gun is ready to use.
Filling the Grease Gun with Prefilled Tubes
1.
Unscrew the gun head.
2.
Draw back the grease tube handle.
3.
Remove the plastic cap of replacement grease
cartridge.
4.
Push replacement grease cartridge into metal
tube.
5.
When grease cartridge is all the way into metal
tube remove metal cover.
6.
Screw on the gun handle.
7.
Push the grease tube handle back into metal tube.
8.
Press clamping lever to release plunger rod into
gun.
9.
Grease gun is ready to use.
Switching On and Off
1.
To start the EZ–Shot move the locking switch (A)
on the bottom of the gun to the ON position. See
Fig. 7.
Note: if the EZ–Shot was switched off while operating,
the pumping mechanism, it will automatically return to
the starting position.
2.
Place the locking switch (A) back to the OFF
position when lubrication is complete.
Fig. 7
A
TI1871A
OFF
ON
Dispensing Grease
1.
Depress the trigger to provide a measured amount
(1 cc, .034 oz.) of grease.
NOTE: When the trigger is released the mechanical
parts in the press head automatically return to the
starting position. Each time the trigger is depressed a
measured amount (1 cc, .034 oz.) of grease will be
dispensed.
