Graco 26D001, Операция и комплектующие

Страница: 23 / 32

Parts
3A8502A 23
Accessories
To ensure maximum pump performance, make sure all
accessories are properly sized to meet your system
requirements.
Air Line
Install the following accessories in the order shown in
Typical Pump Installation , page 10, using adapters as
necessary.
NOTE: Be sure the air valves are easily accessible from
the pump and located downstream from the air
regulator.
• Air line lubricator: Provides automatic air motor
lubrication.
• Air line filter (AC): Removes harmful dirt and
moisture from compressed air supply.
• Bleed-type air valve (AD): Isolates air line
accessories for servicing. Locate upstream from all
other air line accessories.
Fluid Line
Fluid drain valve (AE): Required in your system to
relieve fluid pressure in the fluid supply lines. Install the
drain valve so that it points down and the handle points
up when the valve is opened.
Grounding Clamp (not included)
Bleed-Type Master Air Valve (not included)
Maximum Working Pressure: 300 psi (2.1 MPa, 21 bar)
Air Line Filter (not included)
Maximum Working Pressure:
250 psi (1.7 MPa, 17.5 bar)
Trapped air can cause the pump to cycle
unexpectedly, which could result in serious injury from
splashing or moving parts.
Part Description Qty.
103538 CLAMP, ground 1
Part Description Qty.
107142 VALVE, ball, vented; 1/2 npt(m) inlet x
1/2 npt(f) outlet
1
Part Description Qty.
106149 FILTER, air line; 1/2 npt(f) inlet and
outlet
1
WLD
WLD
WLD