Installation
3A5453D
7
Angled Adapter
If the agitator is used on a drum with an off-center bung
and the blades would contact the side of the drum, the
angled adapter must be used to avoid this contact.
1. Thread the locking ring (16H295) onto the angled
adapter (16H294) by hand, as far as it will go.
2. Thread the angled adapter into the bung until it
bottoms out, then back it out until the widest portion
on of the adapter top is pointing just to the left of the
center of the drum (Fig. 4).
3. Turn down the locking ring until it contacts the drum.
Use an appropriately sized pipe wrench or
adjustable wrench to tighten the adapter down until
the widest portion of the adapter top is in line with
the drum.
NOTE:
The locking ring (16H295) and the angled
adapter (16H294) are sold separately.
F
IG
. 4: Angled Adapter
ti16998a
Adapter
and Lock Ring
Locking
Ring
Angled
Adapter
