Graco 262950 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 72

background image

WARNING

WARNING

WARNING

EQUIPMENT

EQUIPMENT

EQUIPMENT MISUSE

MISUSE

MISUSE HAZARD

HAZARD

HAZARD

Misuse can cause death or serious injury.

• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated

system component. See Technical

Technical

Technical Specifications

Specifications

Specifications in all equipment manuals.

• Do not use this equipment without hose restraints and coupler pins installed on all air and

blast hose couplings.

• Do not blast unstable objects. The high amount of fluid flow from the nozzle can potentially

move heavy objects.

• Do not exceed load rating of lift eyes.
• Do not operate equipment on or stand on an unstable support. Keep effective footing and

balance at all times.

• Use fluids and solvents that are compatible with equipment wetted parts. See Technical

Technical

Technical

Specifications

Specifications

Specifications in all equipment manuals. Read fluid and solvent manufacturer’s warnings.
For complete information about your material, request Safety Data Sheets (SDSs) from
distributor or retailer.

• Do not leave the work area while equipment is energized or under pressure.
• Turn off all equipment and follow the Pressure

Pressure

Pressure Relief

Relief

Relief Procedure

Procedure

Procedure when equipment is not in use.

• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine

manufacturer’s replacement parts only.

• Do not alter or modify equipment. Alterations or modifications may void agency approvals

and create safety hazards.

• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.

BURN

BURN

BURN HAZARD

HAZARD

HAZARD

Equipment surfaces and fluid that is heated can become very hot during operation. To avoid
severe burns:

• Do not touch hot fluid or equipment.

3A3489A

5

«
...
3
4
5
6
7
...
»

Содержание 262950









































































Отзывы:

Нет отзывов

Похожие инструкции для 262950

Бренд: Leister Страницы: 108

Бренд: BOCK Страницы: 38

LFC500-FS Series

Бренд: Watts Страницы: 8

Precision CPU-H Series

Бренд: Harmonic Drive Страницы: 12

Бренд: Danfoss Страницы: 33

Бренд: JUKI Страницы: 24

Бренд: ARAG Страницы: 26

Бренд: Rapid Страницы: 8

Бренд: V-TEK Страницы: 146

Бренд: LPKF Страницы: 24

Бренд: Anywire Страницы: 6

Бренд: Viessmann Страницы: 8

Бренд: Rupes Страницы: 36

I-LOCK MINI COUPLER

Бренд: WEDGELOCK Страницы: 22

Liebert XDU 060

Бренд: Vertiv Страницы: 75

Бренд: Koganei Страницы: 35

MULTICHRON PRO VIS

Бренд: ROBOD Страницы: 2

Бренд: ShowTex Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды