![background image](http://html1.mh-extra.com/html/graco/260110/260110_instructions-parts-list-manual_2253428007.webp)
Operation
311307E
7
Operation
The on-demand dispensing pumps sense the
pump outlet pressure and turn the pump on or
off depending on the pressure. When a dis-
pensing valve is opened, the pressure in the
system drops and the pump will start pumping
fluid. When the dispensing valve is closed, the
pressure increases and the pump will stop.
1. To start the pump, turn power switch ON.
Power switch is located on the back side of
the motor.
2. Place the outlet of the dispensing valve into
the fill tube of the vehicle.
3. Open the dispensing valve to the full open
position until the desired amount of fluid
has been dispensed.
4. To stop dispensing, close the dispensing
valve.
When system is not in use, always turn power
switch OFF. Failure to do so can result in a
spill if a hose ruptures or a leak occurs in the
system plumbing. If a leak occurs, pressure
will drop in the system signaling the pump to
turn on.
See
Parts
, page 10 for reference numbers.
Содержание 260110
Страница 15: ...Notes 311307E 15 Notes...