Turn
Turn
Turn on
on
on Node
Node
Node Communication
Communication
Communication
After entering the generated node IDs into each
Variable Frequency Drive/Inverter, each Pump
Control Module, and each Tank Control Module,
turn on communication between the Intelligent Paint
Kitchen software and each of those components.
Each component having a node ID must be powered
up and communication cables must be connected
between each component and the Supervisor Box.
1.
Press
on any Run screen.
2.
On the Setup menu screen, press Node
Node
Node
Communication
Communication
Communication.
3.
On the Node Communication screen, set each
of the following items:
• Press Pump
Pump
Pump Control
Control
Control Nodes
Nodes
Nodes to turn on
communication to the Pump Control Modules.
• Press Tank
Tank
Tank Control
Control
Control Nodes
Nodes
Nodes to turn on
communication to the Tank Control Modules.
• Press VFD
VFD
VFD Nodes
Nodes
Nodes to turn on communication to
each Variable Frequency Drive/Inverter in the
system.
– Each primary Variable Frequency
Drive/Inverter controls the speed of a
Primary Tank agitator.
– Each secondary Variable Frequency
Drive/Inverter controls the speed of a
Secondary Tank agitator.
4.
Initially, the blue Off
Off
Off button indicates that
all communication is turned off between the
Intelligent Paint Kitchen software and the
component (pump, Tank Control Module, or
Variable Frequency Drive [Inverter]). Press the
button to toggle it to On
On
On for the following:
• Each station (#1–#20) in your system that has
a pump
• Each tank in your system
• Each Variable Frequency Drive/Inverter in your
system
The button turns green and the Intelligent
Paint Kitchen software sends a signal to the
pump to test the communication. If the button
returns to blue (Off), the test signal failed
and the connection could not be made. See
to find possible
reasons and solve the problem.
NOTE:
NOTE:
NOTE: Buttons exist for all possible stations (20
total).
Figure 65 E-Flo DC Nodes Screen
3A4030C
67