Graco 24X427, Инструкция - Каталог запасных частей

Страница: 22 / 32

Torque Instructions
Torque Torque Torque Instructions Instructions Instructions
If fluid cover or manifold bolts have been loosened,
it is important to torque them using the following
procedure to improve sealing.
NOTICE NOTICE NOTICE
Do Do Do not not not over over over---torque. torque. torque. Tightening the bolts too tight
will damage the pump.
NOTE: NOTE: NOTE: Always completely torque fluid covers before
torquing fluid manifolds.
1. Remove the protective bolt covers (37) with
a screwdriver. Carefully work the screwdriver
under the lip of each cap and gently pry it off.
2. Start all fluid cover screws a few turns. Then, turn
down each screw just until head contacts cover.
3. Turn each screw by 1/2 turn or less working in a
crisscross pattern to specified torque.
4. Repeat for fluid manifolds.
Assembly
Torque Re-Torque
Fluid Covers 20 in-lb (2.3
N∙m) 15 in-lb (1.7
N∙m)
Fluid
Manifolds 15 in-lb (1.7
N∙m) 10 in-lb (1.1
N∙m)
Fluid Fluid Fluid Cover Cover Cover Screws Screws Screws Fluid Fluid Fluid Manifold Manifold Manifold Screws Screws Screws
22 334793A