Installation
Electrical
Electrical
Electrical Connections
Connections
Connections
NOTICE
NOTICE
NOTICE
To avoid electrical component damage, remove all
system power before plugging any connectors.
NOTE:
NOTE:
NOTE: See the
Electrical Schematics, page 22
.
1.
Verify that electrical power is removed from the
system.
2.
Remove the cover from the electrical control box.
3.
Remove the knockout (K) from the side of the
electrical control box.
4.
Thread the cable into the electrical control box
and connect to the appropriate connection port
on the enhanced fluid control module (Pump 1
to P1, Pump 2 to P2, Pump 3 to P3, and Pump
4 to P4).
Figure 6 Install Grommet in Electrical Control
Box
Figure 7 Enhanced Fluid Control Module
Connection Points
14
334512C
All manuals and user guides at all-guides.com
