Kit 24N978 and Kit 24N977, for Modbus TCP/AWI Communication
Modbus
Modbus
Modbus Configuration
Configuration
Configuration Information
Information
Information
For
For
For Network
Network
Network Administrator:
Administrator:
Administrator: The Modbus Gateway is
configured at the factory for ethernet communication
with a Graco AWI local network. You can reconfigure
the device to fit your own networking needs. See the
table on this page to restore the device configuration
to the factory defaults. Use the OEM Netbiter Config
utility found at www.anybus.com to change the
device configuration. Also see the Installation Leaflet
for the Anybus Modbus Gateway (supplied) for more
information.
TCP/IP
TCP/IP
TCP/IP Settings
Settings
Settings
IP Address
192.168.178.205
Subnet Mask
255.255.0.0
Default Gateway
192.168.178.200
Modbus
Modbus
Modbus Settings
Settings
Settings
Transmission Mode
RTU
Slave Response Timeout
1000 ms
Physical Interface
EIA-232
Baudrate
115,200 bps
Character Format
No parity / 2 Stop
Bits
Part Number
502
12
332356E
