Instructions
4
3A1494D
4. Secure a strap wrench around the fluid cylinder (32)
and a large adjustable wrench on the intake valve
housing (28). Turn the adjustable wrench counter
clockwise to loosen and remove the valve housing
(28) from the fluid cylinder (32) (Fig. 2).
NOTE:
After a few turns, the valve housing should
be loose enough to finish loosening it with your
hand to remove this part.
5. Secure a strap wrench around the fluid cylinder
(32). Use the strap wrench to turn the fluid cylinder
counter-clockwise to loosen and remove it from the
flange (29) (Fig. 3).
NOTE:
After a few turns, the fluid cylinder should be
loose enough to finish loosening it with your hand to
remove this part.
6. Using a 10 mm socket wrench, remove the 4 screws
(43) from the air valve (38) and completely remove
air valve assembly from air cylinder (27). Also
remove the two cover gaskets (25). If you are
replacing these parts, discard gaskets. (Fig. 4).
Repair and replacement instructions for the Air
Valve are included in a separate repair manual
included with the kit:
•
Air Valve Replacement Kit - 24H848, 24H849,
24H850
•
Air Valve Repair Kit - 24H798
•
Air Motor Service Kit - 24J757, 24J758, 24J759
•
Pilot Valve Kit - 24H749
•
Air Valve Seal Kit - 24H851
•
Air Valve End Cap Kit - 24H852
Fig. 2
Fig. 3
28
32
32
Fig. 4
43
38
27
25
