Setup
3A1937C
15
Setup
For individual screen shot details, refer to VPM Instruc-
tions manual.
1. Make sure the power is on and that the disconnect
switch is in the ON position.
2. Navigate to
Conditioning Screen 1
and select the
appropriate heater.
3. Navigate to
Conditioning Screen 2
to verify proper
selection of heaters is correct.
4. Press
and navigate to the component you
wish to edit the temperature setpoint and alarm.
5. Press the enter key to display the setpoint and
alarm values associated with that component.
6. Edit the setpoint and alarm values and then press
the page back button to return to the previous
screen.
1. Navigate to the
Status Screen, Conditioning Con-
trol Screen.
2. Press
to enter the Conditioning Control
screen.
3. Use the arrows keys to navigate to the desired
zone.
4. Press
to turn the selected zone on. When a
zone is on, the button will be selected. Press the
button again to turn the zone off.
Zone
Setting
Color
Definition
OFF
Black
Dispense Disabled
Grey
Dispense Allowed
ON
Yellow
Dispense Disabled
Green
Dispense Allowed
