background image

Table of Contents

Warnings

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation/Operation

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

System Requirements

5

. . . . . . . . . . . . . . . . . . . . . . . . . . 

How to Use the Trigger Safety Latch 

5

. . . . . . . . . . . . . 

How to Use the Gun 

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

How to Adjust the Spray Pattern

6

. . . . . . . . . . . . . . . . . . 

How to Clean the Spray Tip 

and Clear a Spray Tip Obstruction

7

. . . . . . . . . . . . 

How to Clean the Filter

8

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Service

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts Drawing

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts List

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Technical Data

15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Graco Phone Numbers

15

. . . . . . . . . . . . . . . . . . . . . . . . . 

Warranty

16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

This equipment is for professional use only.

Read all instruction manuals, tags, and labels before operating the equipment.

Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

Do not alter or modify this equipment.

Check equipment daily. Repair or replace worn or damaged parts immediately.

Do not exceed the maximum working pressure of the lowest rated system component. Refer to the

Technical Data

 on page 15 for the maximum working pressure of this equipment.

Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the 

Tech-

nical Data

 section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

Do not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in pressurized aluminum equipment. Such use could result in a
chemical reaction, with the possibility of explosion.

Do not use hoses to pull equipment.

Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 66

C (150

F) or below –40

C (–40

F).

Wear hearing protection when operating this equipment.

Do not lift pressurized equipment.

Comply with all applicable local, state, and national fire, electrical, and safety regulations.

Содержание 238-352

















Отзывы: