Graco 214570, Инструкция-перечень запасных частей

Страница: 7 / 30

Maintenance
307273ZAF 7
7. Clean all parts thoroughly with a compatible solvent.
8. Place the filter support (6) in the screen (5) so the
support stud fits through the small opening in the
bottom of the screen.
9. Press fit the compression spring (8) to the bottom of
the filter bowl (7).
10. Carefully install the filter support (6) and screen (5)
into the filter bowl (7).
11. Replace the o-ring (3) if damaged or worn.
Lubricate the o-ring with No. 2 grease. Bend it into a
kidney shape, then carefully push it into the groove
to avoid damaging it.
12. Lubricate the filter bowl (7) threads and screw it
firmly into the housing (9).
NOTE: Be sure the bottom drain plug or drain valve is
closed before starting the pump.
Model 214570, 236789: Apply PTFE tape to all
non-swiveling pipe threads.
All other models: Apply anaerobic pipe sealant to all
non-swiveling pipe threads.
NOTICE
Improper assembly of the filter support, screen, and
spring will prevent filtering and damage parts.
F
IG
. 1: Model 214570 shown
3
Screw bowl firmly into housing
2529a
4
1
3
2
7
5
6
2
Press fit spring to bottom of bowl.
1
8
9
Lubricate.
1
1
2
3