Graco 204867, Сборка

Страница: 3 / 12

3 306436
Installation
See Fig.1 or Fig. 2, depending on your model.
Models with a Portable Truck
Insert the truck handle (708) into the sockets in the
truck base (701).
All Models
Place a full container of fluid on the base. Carefully
clean the container top before opening it to avoid fluid
contamination. Secure the drum or shield (401) with
the hardware provided.
Models with a Drum Cover
Install the drum cover (601) on the opened drum and
secure it with the thumbscrews (603).
All Models
Slide the pump extension tube (318) all the way down
on the riser tube (314). Insert the riser tube into the
opening in the top of the shield (401) or cover (601).
Lower the pump until the outlet housing (319) rests on
the shield or cover and secure it with the four screws
(309). Install the pump lever (316), clevis (311), and
hose and meter assembly (2 or 5).
To prime the pump, open the nozzle (502) and operate
the pump until fluid flows from the nozzle. Close the
nozzle and place it in the opening in the outlet housing
(319).
Fig. 1
311
316
319
601
603
502
5
309
314
318
104
101
102
06782A
Fig. 2
708
707
706
701
06783