background image

Warnings 

4

334599F

WARNING

SKIN INJECTION HAZARD

High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the 

event that injection occurs, 

get immediate surgical treatment.

Do not aim the gun at, or spray any person or animal.

Keep hands and other body parts away from the discharge. For example, do not try to stop 

leaks with any part of the body.

Always use the nozzle tip guard. Do not spray without nozzle tip guard in place.

Use Graco nozzle tips.

Use caution when cleaning and changing nozzle tips. In the case where the nozzle tip clogs 

while spraying, follow the 

Pressure Relief Procedure

 for turning off the unit and relieving 

the pressure before removing the nozzle tip to clean.

Equipment maintains pressure after power is shut off. 

Do not leave the equipment 

energized or under pressure while unattended. 

Follow the 

Pressure Relief Procedure

 

when the equipment is unattended or not in use, and before servicing, cleaning, or 

removing parts.

Check hoses and parts for signs of damage. Replace any damaged hoses or parts.

This system is capable of producing 3300 psi. Use Graco replacement parts or accessories 

that are rated a minimum of 3300 psi.

Always engage the trigger lock when not spraying. Verify the trigger lock is functioning 

properly.

Verify that all connections are secure before operating the unit.

Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the 

controls.

PRESSURIZED ALUMINUM PARTS HAZARD

Use of fluids that are incompatible with aluminum in pressurized equipment can 

cause serious chemical reaction and equipment rupture. Failure to follow this 

warning can result in death, serious injury, or property damage.

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon 

solvents or fluids containing such solvents.

Do not use chlorine bleach.

Many other fluids may contain chemicals that can react with aluminum. Contact your 

material supplier for compatibility.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on 

skin, inhaled, or swallowed.

Read SDSs to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable 

guidelines.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent 

serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. 

This protective equipment includes but is not limited to:

Protective eye wear, and hearing protection. 

Respirators, protective clothing, and gloves as recommended by the fluid and solvent 

manufacturer.

CALIFORNIA PROPOSITION 65

This product contains a chemical known to the State of California to cause cancer, 

birth defects or other reproductive harm. Wash hands after handling.

Содержание 17C487

























Отзывы: