Optional Center mount bridge SB-CMB
1. The SB-CMB center mount brigde option allows for the mounting of a center microphone. The
SB-CMB mounts to the horizontal bar such that the center mic will follow any z-axis
adjustments made to the Spacebar. Either the 30cm or 66cm bar can be used.
2. The SB-CMB is mounted to the horizontal bar with two 1/4-20 x 1-3/4” socket head cap
screws. Use the 3/16” hex wrench included with the SB-CMB kit to tighten these screws.
3. The 24mm thumb nut clamps the mic holder bar in place. Loosening this nut allows the mic
holder front to back position to be adjusted from 3cm to 13.5cm.
fig. 6 SB-CMB assembly
Stereo Spacebar User Manual Revision C
Page 8 of 13
1/4-20 x 1-3/4”
SOCKET HEAD
CAP SCREW
24mm THUMB NUT
