Page | 58 GRACE MX Manual 2013
Setting the seat height
To set the seat height, loosen the 4 mm Allen
screw of the seat post clamp.
Adjust the height of the seat to your body
measurements by putting your heel on the pedal
at its lowest point. To do this, your leg should be
fully extended.
Make sure that the saddle is aligned horizontally.
Pull the seat post out no further than the mark
for the minimum plug-in depth.
Then tighten the screw of the seat post clamp
with a torque of 5 Nm.
If you pull the seat post out too far, the seat tube can no longer provide
sufficient support for it. The seat post can become loose while you are riding
the bike and can damage or break the seat tube. There is a risk of accident
and injury!
