Page | 56 GRACE MX Manual 2013
Switching the drive on/off
Insert the battery into the holder and switch it
on using the On/Off button. The drive of the
GRACE MX can be switched on and off also on
the control computer (see page 61).
Switching on the battery also switches on the
control unit display.
The control unit shows the state of charge of the
battery as well as the settings of the drive unit.
The pedals of your GRACE MX must not be subject to load when the battery is
switched on, as otherwise the capacity of the drive will be limited.
If the battery was inadvertently switched on with a load on the pedals, switch
it off and then on again without the load.
The drive will be activated as soon as you step on the pedals (except for drive assistance
mode). The level of assistance depends on the settings of the control unit. As soon as you
stop pedalling in normal mode or as soon as you have reached a speed of 25 km/h
1
or 45
km/h
2
, assistance from the drive is switched off.
The drive will be automatically re-activated as
soon as you step on the pedals and the speed is
below 25 km/h
1
or 45 km/h
2
To switch the drive off, switch the battery off
using the on/off button.
1
MX-Pedelec
2
MX S-Pedelec
