- 4 -
NO
me. Leave loose to allow for final frame
tep 5: Table Top and Track Assembly
TE! Do not completely tighten 1 ½ bolts at this ti
adjustments after the rails are installed!
S
0” .25 Track
sion
Bolt
aces connected, you are ready to put your king size table top into place. Do so with
the “
¾
nuts. Secure
the m
¾
e to allow for final
fram
¾
pictured.
tep 6: King Rail Assembly
Parts Needed
1 – 13
1 – 138” .25 Track
1 –Table King Exten
6 –1/4 x 45mm Connector
6 –Rectangle Nut
¾
With your br
K” right side up facing the same direction as the “M” on the adjacent table top.
Secure the king size table top using four ¼ x 45mm connector bolts and rectangle
iddle table top using two ¼ x 45 mm connector bolts and rectangle nuts.
NOTE! Do not completely tighten 1 ½ bolts at this time. Leave loos
e adjustments after the rails are installed!
Place the 130” and 138” tracking into place as
130” Track
138” Track
S
xtensions
With each rail, place the 24” rail
with
¾
e on the
fram
e
You will now push in on the frame from both sides, being sure to eliminate any space
betw
Having done this adjustment, you are now ready to tighten all bolts and the braces and
tabl
OU HAVE NOW COMPLETED YOUR KING SIZE EXTENSION ASSEMBLY!
Parts Needed: 4 – 24” Rail E
4 – 24” Dowels
¾
24" Rail
34" Rail
70" Rail
King Extension Rail Assembly
coupler in between the 70” rail
and 34” rail as pictured.
Put your rails in plac
e, noting any gaps between th
rail ends and Pole Mount Ends.
¾
een all three the rail ends and Pole Mound Ends.
¾
e tops.
Y
