King Extension Assembly Kit
**You will use some hardware from your current assembly in addition to what is provided in this kit.
Step 1: Brace Extension A
Parts Neede
ssembly
d:
e Extension Part A
hole with T-Nut in the second part, as pictured. . R
Step 2: King Leg Assembly
2 –Brac
2 –Brace Extension Part B
4 –5/16 x 1 ½ hex bolt
4 –5/16 flatwasher
Brace extension
Part A
Brace extension
Part B
5/16 X 1 1/2
hex bolt
5/16 washer
¾
Pair part “A” and “B” Brace Extension together as pictured. As you connect them, be
sure the sides with the “A” and “B” are facing away from each other.
¾
Place the hex bolts through a washer and through the hole of the first part and into the
epeat this process for both sets.
Middle Leg
Part B
Middle Leg
Part A
King Extension
Middle Leg Brace
rectangle nut
45mm
connector
bolt
arts Needed:
on Middle Leg Brace
Bolts
¾
actly as pictured
for proper assembly (lettered sides facing
n).
¾
h the holes in the legs and into the
lot
ough
P
1 –Middle Leg
1 –Opp osing Middle Leg
1 –King Extensi
2 –1/4 x 45mm Connector
2 –Rectangle Nuts
Position the parts ex
i
Put the 45mm connector bolts
throug
s
of the leg brace, threading it thr
the rectangle nut. Tighten the connector
bolts completely.
- 2 -