5
Quilting With the Grace
NM-
EZ3
TM
56/96
Quilting Frame
Before You Begin
<
Using the parts list as a reference, take the parts out of the box and make sure that you have
them all. (If there is something missing or broken, contact The Grace Company. We will
promptly ship any needed item.)
Tools Needed
<
To assemble the frame you will need a few common tools. Once the frame is assembled, no
tools will be needed for the use of the frame.
1. One 1/2" wrench
2. One 7/16" wrench (A combination or socket wrench will also work.)
3. Phillips Head Screw Driver
Note: To help you distinguish wood parts, all Left Side parts are marked with an “L” grooved
into the wood on the inside of the part.
Step 1: Hardware to Diagonal Stands
Parts Needed:
Right and Left Diagonal Stands
6 - 5/16" x 2" Carriage Bolts
6 - Jamb Nuts
6 - 1/4" Smaller Flat Washers
<
Note direction carriage bolt goes through the part.
<
Tighten nuts on carriage bolt to pull the square part of the
bolt into the wood until the bolt is seated into the wood
part.
Step 2: Hardware to Pivot Sections
Parts Needed:
Right and Left Pivot Sections
2 - 5/16" x 2" Carriage Bolts
2 - Jamb Nuts
2 - 1/4" Smaller Flat Washers
<
Note direction of carriage bolts to Pivot Sections. (See
Below)
<
Position carriage bolts through pivot sections as shown
in drawing. Tighten jamb nuts over end of carriage bolts
until the square
part of the carriage bolt is drawn and seated into the wood.
Right Side
Left Side
