2
Step 1 - Attaching the Tablet Mount
Parts Needed:
1-1: Using the 2mm Allen Wrench loosen all (4) set
screws on the QCT Bracket Q’nique 15.
1-2: Place the QCT Bracket Q’nique 15 onto the
handle bars as shown until the locater tabs snap
into place.
1-3: Use the 2mm Allen Wrench to tighten the (2)
set screws on each side of the QCT Bracket Q’nique
15.
Tools Needed:
2mm Allen Wrench
|
Q’nique 15” Machine
Quilt Motion
Tablet Tray (1)
QCT Bracket
Q’nique 15 (1)
3 Wing Plastic
Knob M6 (1)
Set Screw
2mm Allen Wrench
QCT Bracket Q’nique 15
Set Screw
Push in
tab using
a flathead
screwdriver if
necessary
