29
Here: 1. UserAccountID: user account ID. This ID is assigned once a user registration is
completed. 2. GeigerCounterID: a global unique ID for each registered Geiger Counter. 3.
CPM: Count Per Minute reading from this Geiger Counter . 4. ACPM: Average Count Per
Minute reading from this Geiger Counter(optional). 5. uSv: uSv/h reading from this Geiger
Counter(optional).
Followings are valid data submission examples:
1. http://www.GMCmap.com/log.asp?id=15+13.2+0.075
2. http://www.GMCmap.com/log.asp?id=15+13.2+0
3. http://www.GMCmap.com/log.asp?id=15+0+0
4. http://www.GMCmap.com/log.asp?id=0+13.2+0
5. http://www.GMCmap.com/log.asp?id=0+0+0.075
The result will be returned immediately.
The following are the returned result examples:
1. OK.
2. Error! User is not found.
3. Error! Geiger Counter is not found.
4. Warning! The Geiger Counter location changed, please confirm the location.
If a location change warning received, the user need to confirm the location from that Geiger
Counter profile. OR Create another Geiger Counter from your account. In this case, you can
have two locations share one Geiger Counter.
Applications
Stationary Application
The unit has two holes on its back for hanging the unit on the wall for stationary monitoring
of radiation and long term surveillance applications. With the wall adapter, it is able to
monitor the data continuously, 24/7.
Mobile Application
To use the unit in the car while driving, use a car adapter to charge/power the unit.
Position the unit where it can easily detect radiation, i.e. on the dashboard or similar
locations in the car. You may need to fix the unit to an appropriate location for safety
reasons.
Other technical details you may want to know
Data Port
This model has a 3.5mm analog data output port. It uses standard 3.5mm audio stereo plug,
This port is not for the earphone. The audio signal is for third party device and software. The
signal can be connected to other devices or computer microphone port directly.
