9
1. 10.1" Display
2. Built-in Stereo Speakers
3. Display Swivel Joint
Adjusts viewing and rotation angle up to 180°.
4. Play Controls
Press
to play or pause a loaded disc.
Press to stop playing a loaded disc.
Press
to skip tracks or chapters.
Press
to adjust the volume level.
Press
for menu navigation.
5. Audio / OK / Menu
Press Audio to adjust audio settings for a loaded
DVD, including Voice Description and DVD
commentary (if available).
Press OK to confirm selections.
Press Menu to access DVD menus.
6. Setup / Source / Pair
Press Setup to access DVD player menus, settings,
and options.
Press Source to switch between DVD, CARD, and
USB modes. Press OK to confirm selection.
Press and hold Pair to pair to the included
headphones (see pg. 13).
7. Disc Player
Press Open to open the disc door. Load CDs or
DVDs label side facing up.
8. Stereo Headphone Jack
9. USB Port
10. SD Card Slot
11. 3.5mm AV Out
Use a 3.5mm to RCA audio/video cable (not
included) to connect to another device or screen
and play media through the AV Output.
12. DC Power Port
Connect power adapter (2x included) to charge
battery and power the unit.
13. Power Switch
Slide to power ON or OFF.
14. Remote Sensor / LED Indicators
Aim remote at this sensor (see pg. 11).
Power ON + Battery Charging - Solid green light.
Charging Battery - Solid red light (player OFF).
Charging Complete - No lights.
Bluetooth Unpaired - Flashing blue light.
Bluetooth Paired - Solid blue light.
Loading and Playing a Disc
1. Press Open to open the Disc Door.
2. Load a disc into the player, label side facing up, then close the disc door.
3. After a disc is loaded, it will begin playing automatically. If the disc does not begin playing automatically, press
the Play/Pause button. Use the controls on the player or the remote to play media, navigate settings menus, etc.
Programming a Loaded Disc
1. While the loaded disc is playing, press the Prog button on the remote.
2. Use the Arrow buttons to select a program slot.
3. Use the Number Keypad to enter in the chapter and title, or track.
4. Use the Arrow buttons to highlight the on-screen START button and press the OK button to begin playing.