IntelliTrac X1-Plus Series User Guide
Systems & Technology Corp. © 2011
This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.
- 1 -
1
1
.
.
I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
Thank you for your purchasing IntelliTrac X1-Plus GPS Vehicle Tracking device. The benefits are:
Improve Safety
Ensure Security
Good efficiency on Fleet management and Dispatch solution
Asset and resource management
Economic operation and improving productivity
Keep the Journey record for future analysis or accident report
Where is the Car? When it will arrive? What is its speed now?
1.1 Scope
The purpose of this document is to describe how to getting started with the IntelliTrac X Series
devices. The document contains basic device configuration. For advanced users, please refer to the
IntelliTrac X Series Protocol Document for detailed information.
1.2 About IntelliTrac X1-Plus
The IntelliTrac X1-Plus GPS Unit wirelessly transmits location, peripheral, and vehicle control data
to a control center. Location data, including speed, direction, mileage, and altitude, is provided by
an onboard GPS receiver. Wireless transmission is achieved using an onboard GSM/GPRS module.
microcontroller is used to poll location and command data at regular intervals, derive actions based
on location, peripheral, and control data, and execute those actions.
One of the best feature of X series AVL is that they can transit data on ASCII mode.
Peripheral data indicates the status of the various peripherals that are connected to and/or
controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt,
ignition, battery, engine and panic button.
Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS
and GSM/GPRS networks.
Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by
controlling the amount of current the unit consumes.
