GPS PS-2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 8

Remove Top Cover
Lift top cover straight up to remove as shown.
Step 2.
·
PS-2
24V DC
OUTPUT
L
INP
UT 120-277 VAC
G
N
RLY1
RLY2
[ -]
[+]
RLY1
RLY2 RELAY
Wiring
NOTE: Metallic conduit shall be properly bonded in accor dance with the national electric code article 250.
Connect the appropriate conduit and fitting as necessary for the application.
Route the wires as shown and make connections according to the marking located on the product.
Tighten the fittings to adequately secure the cable and conduit.
Step 3.
·
·
·
For installations in plenum spaces use only metallic clad conduit on incoming AC power.
Wire colors will vary by incoming AC power and GPS product.