1
2
3
4
5
BEFORE USE, BE SURE:
•
There are no foreign objects inside the circulating fan.
• The power is connected.
• The circulating fan is placed steadily.
REMOTE CONTROL FUNCTIONS:
1. Speed: High
2. Speed: Medium
3. Speed: Low
4. Power: On
5. Power: Off
The fan will begin to spin on every power up. Ensure all
guarding is installed before applying power.
Note: •
The remote control can be used to operate a single fan system or multiple fans at the same time.
Cleaning Cycle
The IDF-2 comes with a preset cleaning cycle designed to clean the ionizer emitters twice per day.
Operation
Line/L1
120V - 240V Power Connections
Neutral/L2
Wiring
1. GPS recommends the IDF-2 be connected to a switched power source such as a lighting circuit.
3. If wiring to a non-switched circuit a means of removing power is required.
2. The IDF-2 requires a 120-240 VAC source. Connect the power wires as follows:
4. Remove the terminal block cover with a Philips-head screwdriver.
