www.globalplasmasolutions.com
www.gpsair.com
For technical product queries, please reach out to [email protected]
Thank you for purchasing a GPS-FC24-AC air ionization system from GPS Air.
Hardware Provided by GPS
Before you start, confirm the contents of your shipment. Each GPS-FC24-AC will consist of the
following
1. GPS-FC24-AC with in line power switch.
2. Rare earth magnets (2).
3. Machine screws and nuts (2 each) for mounting magnets.
Hardware by Others
1. Electrical wiring, junction box, or receptacle to provide power to the GPS-FC24-AC.
2. Self-tapping screws (optional) if not using magnet mount.
3. Zip ties.
As part of the installation process, a Startup Document should be
completed. For the latest version of the document, visit our website
or utilize the QR code.
Installation Location
WARNING:
MAKE SURE POWER IS DISCONNECTED TO THE HVAC EQUIPMENT BEFORE INSTALLATION
AVERTISSEMENT:
ASSUREZ-VOUS QUE L’ALIMENTATION EST DÉCONNECTÉE DE L’ÉQUIPEMENT CVC
AVANT L’INSTALLATION
GPS recommends mounting the GPS-FC24-AC after the filtration system and after the coil(s) section(s) in the HVAC
system. In ductless mini-split ceiling cassette applications, it is suggested to mount the unit to the fan inlet. The
emitter brushes should be no closer than two inches from any wiring or metal objects.
NOTE:
Use Temperature - Maximum Ambient temperature in which unit shall be used: 140 degree F/ 60°C
!
!
