GPS Designer international GW-2010, Руководство пользователя

Страница: 13 / 15

13
10. Set APN Command
Create the SMS “802#APN letters or digits, 4-20 bits # Log user name letters or digits
4-20 bits in # Log password letter or digits 4-20 bits in # terminal password 4 bits ##”
and send it to the terminal; after executing this command, the terminal will
automatically restart and connect to GPRS with APN set.
Command example 1: #802#internet###0000###
Command example 2: #802#ccdnet#quxies#RX0000#0000##
ccdnet is APN.
quxies is user name
RX0000 is password.
Note: The default APN is CMNET.
11. Setup of IP Address
Command: #803# Fixed IP # port number#4-digit password##
This command is used to set GPRS center server address, which could be fixed IP
number, like IP1, IP2, IP3, IP4……as well as domain name with the length less than 64.
After the setup is successful, the module will send a reply with ‘&803&successful
setting&&’ or ‘&803&PASSWORD ER&&’ if the password is wrong.
Example
:
#803#222.73.173.204#7003#0000##
Setup via domain name:
Example: #803#gps.chinaradio.hk#9876#0000##
12. Low-Voltage Alarming Function
If the terminal of the ward has a very low power and needs to be powered off, the
terminal of the ward will automatically upload one piece of low-voltage alarming
command to the monitoring center number.
SMS Format: IMEI Number: low power; please charge the battery in time (information
about latitude and longitude or base station)
Example: 356823031017473: low power, please charge the battery in time
(11354.6397, E, 2232.6283, N) or 356823031017473: low power; please charge the
battery in time (26280E77).