Installation
Install the printer
1. Please put the printer on the stable surface.
2. Make sure printer power is turned off, please do not plug
the power cable when the printer power is turned on.
3. Connect serial or USB or Parallel or Ethernet cable to
printer and PC.
4. Connect power plug to power supply socket.
Be careful:
※
Please turn off the power switch the printer in the power socket,
※
Transmission interface in the picture will vary depending on your printer
purchased aircraft type, the actual transmission interface, please refer to
the corresponding product specifications
power line is inserted into the printer.
<Picture 6>
Ribbon installation
1. Press two press buttons on left and right
side to open printer top cover.
2. Put empty paper tube into ribbon take-up
hub if you buy new ribbon which one side is
no contact with paper tube.
After that, install ribbon take-up hub left side
and right side onto printer.
Remark: Factory standard ribbon two sides
already fixed well on paper tube. Go ahead
to step 3 instead of step 2.
3. Press the Push button to open print head.
