Button Function
Feed
When the printer is ready (LED blue fixed), click the button, label paper into the front end of a paper label.
Print job timeout
The printer in the print, click the PAUSE button to print suspended. At this time power indicator is
blue flashing. Just click the button, the print job resume normal.
Start function
The printer has six kinds of power function can be used to set or test the printer hardware. In the
boot and press the button with lamp signal release key can start these functions.
Six
Power
-
up
Functions:
Function
Descriptions
Self-test page
A.Turn off the printer.
B.Make sure the paper roll is installed correctly and the printer
top cover is closed.
C.Press and hold
FEED
button and turn on the printer. Self-
test page will be printed, then release
FEED
button.
You can use this function to check if printing function is normal or not.
Print DIP Switch page
Debugging Mode
A.Turn off the printer.
B.Make sure the paper roll is installed correctly and the printer
top cover is closed.
C.Press and hold
PAUSE
button and turn on the printer. When
paper feed and then release
PAUSE
button,
DIP
switch page
will be printed out.
A.Turn off the printer.
B.Make sure the paper roll is installed correctly and printer
top cover is closed.
C.Press and hold PAUSE and FEED button, and turn on the
All label data received in this mode will be printed by machine code.
Right side is ASCII character strings, left side are hexadecimal value
of ASCII character strings. This function is for user or engineer to
debug the program. If you turn off printer and then turn on, printer
will go back to normal printing mode.
printer. When Power indicator(blue) and Error indicator
(red) are on at the same time, release PAUSE and FEED
button, printer goes to Debugging Mode, and you will find
below page printed out:
