GPO Display
Video Walls - Commercial Monitors - Digital Signage - Visual Solutions www.gpodisplay.com
Each display features four pegs located on its rear side.
Each of these pegs has a round, button-shaped knob
which fits into the openings in the H-Mounts. When
hanging a display in an H-Mount, ensure that the display
is
parallel to the H-Mount (not angled).
This will help
ensure that all four pegs are inserted into each of the
four mount openings/insertion points.
21
Display Mounting (3x3 example)
STEP 3
Each display and its corresponding H-Mount has the
same width & height. When installing displays, note
that the service opening is positioned so that the
display outline will sit ~1.4” higher than the mount
outline when the pegs are aligned with the service
opening. Horizontal guide notches on the bottom
corners of the H-Mount frame help to guide the display
position during the mounting process, showing whether
the pegs are aligned with the openings/insertion points.
The bottom bezel of the display should align with the
horizontal notches during mounting.
*NOTE: Prior to installing displays, ensure cabling is
properly positioned, as shown on p. 18 of this manual.
Wall Mount
Display
Peg
Guide notch
Chapter 4 Display Mounting
