GPO Display
Video Walls - Commercial Monitors - Digital Signage - Visual Solutions www.gpodisplay.com
1. Carefully unpack the display, using only the handles at the rear of the panel to
lift it out of the cardboard box.
* Caution:
When carrying the panel within the bag, be sure that you are grasping the display
and not the bag only as the bag may tear, resulting in damage to the panel
2. Lay the back of the Set down on a table
(LCD panel facing upward)
3. Power the display on and check for a “no signal” message.
Assign the display’s
Set ID
using the remote controller provided in
the accessories box and make a note of this Set ID number. Power
the display off (See OSD interfaces on the right). For more detailed
information on this process, consult the display user manual.
19
Preparation of Display
STEP 1
Chapter 4 Display Mounting
[NSV / EN Series]
[EK Series]
Note: Set ID’s are assigned prior to shipment.
Set ID’s are marked on the display box.
