11
PA-120H SPECIFICATIONS
Applications
Fluids: Thin (0 to 50 centipoise viscosity) chemicals.
Operating Environment: Outdoor, operating temperature range
of –20
°
to +120
°
F (–30
°
to +50
°
C). Designed for
mounting on above ground storage tanks.
Pump Housing
Lightweight, durable, molded plastic housing for chemi-
cal corrosion resistance. Convenient union ring, spin
collar, or dry break coupler for easy installation.
Performance
Pump Rate: Up to 12 GPM (45 LPM). Rate will vary with
viscosity and temperature.
Duty Cycle: 30 minutes ON, 30 minutes OFF. Duty cycle will
vary with viscosity and temperature.
Electrical Specifications
Input:
115-volt AC, grounded, GFCI protected
Cord:
18 gauge, 3 wire, grounded plug equipped with circuit
breaker.
Mechanical Connections
Bung:
2 or 4 inch
Nipple: 2 inch
Inlet:
1 inch
Outlet: 1 inch
Recommended Accessories
Standard EPDM 1 in. x 12 ft. (3.7m) discharge hose.
Standard 1 in. ball valve nozzle.
PA-200H SPECIFICATIONS
Applications
Fluids: Medium/thick (10 to 450 centipoise viscosity) chemi-
cals.
Operating Environment: Outdoor, operating temperature range
of –20
°
to +120
°
F (–30
°
to +50
°
C). Designed for
mounting on above ground storage tanks.
Pump Housing
Lightweight, durable, molded plastic housing for chemi-
cal corrosion resistance. Convenient union ring, spin
collar, or dry break coupler for easy installation.
Performance
Pump Rate: Up to 8 GPM (30 LPM). Rate will vary with viscosity
and temperature.
Duty Cycle: 30 minutes ON, 30 minutes OFF. Duty cycle will
vary with viscosity and temperature.
Electrical Specifications
Input:
115-volt AC, grounded, GFCI protected
Cord:
18 gauge, 3 wire, grounded plug equipped with circuit
breaker.
Mechanical Connections
Bung:
2 or 4 inch
Nipple: 2 inch
Inlet:
1 inch
Outlet: 1 inch
Recommended Accessories
Standard EPDM 1 in. x 12 ft. (3.7m) discharge hose.
Standard 1 in. ball valve nozzle.
SERVICE
For warranty consideration, parts or other service information,
please contact your local distributor. If you need further assis-
tance, contact the GPI Customer Service Department in Wichita,
Kansas, during normal business hours.
A toll free number is provided for your convenience.
1-800-835-0113
To obtain prompt, efficient service, always be prepared with the
following information:
• The model number of your pump
• The serial number or manufacturing date code of your pump
• Parts descriptions and numbers
Part information can be obtained from the Illustrated Parts List.
For warranty work, always be prepared with your original sales
slip or other evidence of purchase date.
Please contact GPI before returning any parts. It may be
possible to diagnose the trouble and identify needed parts in a
telephone call or letter. GPI can also inform you of any special
requirements you will need to follow for transportation and
handling of chemical equipment.
NOTE: Do not return pumps without specific authority from the
Customer Service Department. Due to strict regulations
governing transportation, handling, and disposal of chemi-
cals, pumps will not be accepted for rework unless they are
completely free of chemical.
