P0: Speed unit -
switch speed units (km/h or mph)
password when you turn on the scooter. The default password is 1111.
Next time you turn on the scooter, you’ll be prompted to enter the password you set. First enter your password,
to confirm the password, have the last digit of the password selected and then shortly press the M button.
P3: Set password -
the value t
o OFF
t
o disable it.
mode will also disengage the cruise control.
Error codes
100, 101 -
200 -
300 -
400 -
500 -
600 -
700 -
5.
F
olding
5 (ENG)
6
DO NOT ride the scooter if the folding mechanism is damaged or if the locking pin is not properly secured.
Stem cap
Stem
A
B
C
4mm
4mm
4mm
4mm
handleba
r not mounted to the steering column. To
moun
t the handleba
r
,
you
will fi
rst need to unscrew
and remove the top cap at the steering column
using the 4mm hex key (
figu
re 1). Align the
handleba
r hole on top of the steering column and
the steering column and replace the stem cap as
sho
wn on figu
re 2. Tighten the thr
ee bolts sh
own
handleba
r
is fi
xed make sur
e that all the bolts
of the
secured. Tight
en the bolts i
f any of the components
are loose.
A
B
C
5.
1.
2.
3.
4.
A
B
Turn your scooter o
ff b
efore
folding. To fold or unfold the
catch mark
ed figu
re 4 as A. Then
pull
b
ack on the quick release
lever marked as B on
fi
gure 4. If
you have di
ffi
culty moving the
quick release lever push the top
of the steering column forwards
as you pull the lever.
Once the scooter is in the desired
down on the quick release lever
marked as A on
fi
gure 5. Make sure
the locking pin marked as C on
fi
gure 5
fi
ts securely into the cavity.
Once the quick release lever is in its
folding lever catch marked as B on
fi
gure 5.