GP XPLOR PHR19 Скачать руководство пользователя страница 4

Страница: 4 / 34

Operating instruction

Getting to know your headlamp

(A) Button A
(B) Button B
(C) Bracket
(D) Flood light

(E) Unscrew battery cap to change

battery- /-

(F) Battery/Charge indicator
(G) Unscrew to access USB-C charge port
(H) Spot light

Spot light

• Single press (A) to cycle through settings.

Low > Med > High > Ultra-High > Off

• Double press (A) at any time to turn off and

memorizes last selection.

Flood light

• Single press (B) to cycle through settings.

Ultra-low > Low > Med > High > Off

• Double press (B) at any time to turn off and

memorized last selection.

Turbo

• Press and hold (A) or (B) for > 1 sec to

activate Turbo mode from any light setting.

• Double press (A) or (B) to turn off settings.

SOS & Beacon

• To activate SOS, press and hold (A) or (B)

for 5 sec to activate SOS. Activation can

be from off or when already on.
• To activate Beacon, press (A) and then

press (B) or press (B) and then press (A).

•  Press (A) to returns to low spot only.
•  Press (B) to returns to ultra-low flood only.
•  Double press (A) or (B) to turn off all settings.

Lock-out

• Lock - Press (A) and (B) simultaneously for

3 seconds – LED battery red indicator
flashes twice to confirm lock-out activated.

• Unlock - Press (A) and (B) simultaneously for 3

seconds – LED battery green indicator flashes
twice to confirm lock-out de-activated.

Battery indicator

• When headlamp off double-press (A) or (B) to check battery level.
Solid green

Over 70%

Solid red

35% to 70%

Red flashes 3 times

Below 35%

• Low warning indicator – When battery is below 35%, the light in use will flash twice every 5

minutes.

Over-heat protection

The output will drop down one step if overheating occurs to protect the headlamp.

Specifications

Weight

: 137g (with 18650 battery)

Dimensions

: 91.5 x 52.2 x 42 mm

LED

: OSRAM LED

Material

: Die-cast aluminium

Circuit

: Digitally regulated

Battery

: 1 x 18650 Li-ion battery or 2 x 3V CR123A

Battery protection : Over-charge and over-discharge

Note

1. The above specifications are tested by GP internal laboratory using GP 18650-26FCP 3.6V

2550mAh rechargeable Li-ion battery at temperature 20 - 25°C and humidity ranging from 40% -
80%.

2. The performance may vary according to working environments and actual battery conditions.

Usage and Care

• Do not dismantle headlamp as this can cause harm to the headlamp and the person and will void

the warranty.

• This has a high lumen output so do not shine directly into anyone’s eyes as it may cause harm

and injury.

•  Use suggested batteries for this product for your own safety.
•  Do not use cleaning agents that may damage the products. Use soft cloth to avoid scratching.
•  When charging always connect charge port carefully to avoid water and other liquids getting into

the port which may cause damage to the unit and battery.

• Seek medical advice immediately if a battery has been swallowed.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If

contact has been made, wash the affected area with copious amounts of water and seek medical
advice.

• When possible, remove the battery from the equipment when not in use.
• Dispose of battery properly.

Caution

• Charging incorrect type batteries may lead to explosion, battery rupture or leakage, personal

injury or property damage.

• Do not dispose of batteries in a fire or a hot oven, or mechanically crushing or cutting of a battery

that can result in an explosion.

• Leaving a battery in an extremely high temperature or low air pressure surrounding environment

that can result in an explosion or the leakage of flammable liquid or gas.

ANSI FL1 Standard

Output Lumen
Runtime
Beam Distance
Impact Resistance
Waterproof

Ultra-High