Step 3
Attach Base Plate (F) to the Base (A) using 4 x Bolts M8 x 16mm (
P
).
Place Spring Cover Cap (G) over Lower Pole (H) and twist clockwise
until firmly secured. Slide Lower Pole (H) through the hole at the
top of the Base Plate (F) until the coil on the end of the Lower Pole (H)
sits on top of the Base Plate (F).
Loosen Height Adjustment Knob (J) on the Middle
Pole (I) by twisting counter-clockwise and slide Upper
Pole (K) into the Middle Pole (I). Adjust the length of
the Upper Pole (K) to the desired height and secure it
into place by twisting Height Adjustment Knob (J)
clockwise until it is firmly in place.
A
F
G
H
P
P
P
P
Assembly Instruction
03
Keycode: 42702672
Boxing Stand
04
Assembly Instructions
Keycode: 42702672
Boxing Stand
BOXING | boxE
REFLEX STRIKE BAG
SAC DE FRAPPE RÉFLEXE
Finish
Note:
Height is Adjustable.
There is Max Height
Marked on Upper Pole (K).
Step 5
Slide Foam Cover (L) over Upper Pole (K). Secure the
Punch Ball (M) to the Upper Pole (K) with Bolt M6 (q)
and Nut M6 (e). Adjust the position of the Foam Cover (L)
so it sits just beneath the Punch Ball (M).
Step 4
K
I
J
Black plastic ring
Step 6
Place 2 x Base (A) on the ground and remove 2 x Base Cap (B).
Fill the Base (A) with either water or sand and then screw the
Base Caps (B) back onto the Base (A).
L
M
K
R
R
Q
Q
Step 7
Slide the part of step 5 into the part of
step 6 and screw the Middle Pole (I) into
the Spring Cover Cap (G), ensure all the
parts are connected firmly.
B
B
B
B
