After you have finished pushing your R8
(pull the manual freewheel lever backward).
PRECAUT I ON S DURI NG IN CLEMEN T WEAT HER
Avoid exposing your R8-S scooter to inclement weather.
showers, but extended use is not recommended in heavy rain. If you are suddenly c
rain, snow, severe cold or heat while operating your
opportunity. Thoroughly dry your R8
store your R8-S in dry and clean conditions.
CHARG I NG T HE B AT T ERY
1. Insert the charger plug (8) in the charging socket (10) located on the right side of the tiller
column.
2. Plug the charger power cord (9) into a wall socket (11).
3. When charging is complete, remove the charger power cord (9) from the wall socket
and then remove the charger plug (8) from the charging socket (10).
4. Under ideal storage conditions, batteries that were charged to full capacity and were not
used should be recharged every month.
5. If you expect not to use your R8
it for two days and then disconnecting the batteries.
6. If you have not used your R8
least 24 hours before driving.
Note:
There is NO need to disconnect the charging plug immediately after the charging is
complete.
However, DO NOT leave the charger connected to the batteries FOR MORE
THAN TWO WEEKS.
As long as the charging plug is in the charging socket, the electronic con
automatically cuts all power to the electric system and it cannot be
The charger supplied is suitable for charging lead acid dry/gel batteries. Use only the
defined type of charger. Before using any other type of charger, check wit
After you have finished pushing your R8-S, always return it to the drive mode to lock the brakes
(pull the manual freewheel lever backward).
N CLEMEN T WEAT HER
S scooter to inclement weather.
The R8-S will operate in light rain
showers, but extended use is not recommended in heavy rain. If you are suddenly c
rain, snow, severe cold or heat while operating your
R8-S, proceed to shelter at the earliest
opportunity. Thoroughly dry your R8-S before storing, charging, or operating it. Maintain and
S in dry and clean conditions.
Insert the charger plug (8) in the charging socket (10) located on the right side of the tiller
Plug the charger power cord (9) into a wall socket (11).
When charging is complete, remove the charger power cord (9) from the wall socket
and then remove the charger plug (8) from the charging socket (10).
Under ideal storage conditions, batteries that were charged to full capacity and were not
used should be recharged every month.
If you expect not to use your R8-S for an extended period of time, we recommend charging
it for two days and then disconnecting the batteries.
If you have not used your R8-S for an extended period of time, charge the batteries for at
least 24 hours before driving.
There is NO need to disconnect the charging plug immediately after the charging is
However, DO NOT leave the charger connected to the batteries FOR MORE
As long as the charging plug is in the charging socket, the electronic con
automatically cuts all power to the electric system and it cannot be
The charger supplied is suitable for charging lead acid dry/gel batteries. Use only the
defined type of charger. Before using any other type of charger, check wit
10
S, always return it to the drive mode to lock the brakes
S will operate in light rain
showers, but extended use is not recommended in heavy rain. If you are suddenly caught up in
S, proceed to shelter at the earliest
S before storing, charging, or operating it. Maintain and
Insert the charger plug (8) in the charging socket (10) located on the right side of the tiller
When charging is complete, remove the charger power cord (9) from the wall socket (11)
and then remove the charger plug (8) from the charging socket (10).
Under ideal storage conditions, batteries that were charged to full capacity and were not
eriod of time, we recommend charging
S for an extended period of time, charge the batteries for at
There is NO need to disconnect the charging plug immediately after the charging is
However, DO NOT leave the charger connected to the batteries FOR MORE
As long as the charging plug is in the charging socket, the electronic control of the R8-S
automatically cuts all power to the electric system and it cannot be
driven.
The charger supplied is suitable for charging lead acid dry/gel batteries. Use only the
defined type of charger. Before using any other type of charger, check with your dealer.
