GOVECS ELMOTO LOOP, Руководство пользователя

Страница: 21 / 92

21
EN
BATTERY
Removing the battery
You can remove the battery for storage or off-board charging�
• Turn the scooter off�
• Open the glove box�
• Pull the wire to open the seat�
• Unplug the battery connector�
• Remove the safety strap holding the battery�
• Lift the battery up by the handle�
Power button
• The Power button can be used to check the state of charge of
the battery�
• In case of a battery error, holding the Power button for
5 seconds resets the battery�
LEDs
• The 4 LEDs on the battery display the state of charge (SOC)� It is
displayed either continuously during charging, or for 20 seconds
after pressing the Power button�
• The table on the right show how the LEDs translate to SOC�
• When the battery is idle, a single blinking LED indicates an
error� Clear the error by resetting the battery with the Power
button� If that doesn't solve the issue, contact an authorised
Service Centre�
LED1
(red)
LED2
(green)
LED3
(green)
LED4
(green)
Action Description
Button pressed 0% <= SOC <= 10%
Button pressed 10% < SOC <= 25%
Button pressed 25% < SOC <= 50%
Button pressed 50% < SOC <= 75%
Button pressed 75% < SOC <= 100%
Charging 0% <= SOC <= 25%
Charging 25% < SOC <= 50%
Charging 50% < SOC <= 75%
Charging 75% < SOC <= 100%
Charging SOC = 100%