External Postioner (Fixed) Camera - Quick Start Guide
3830 SW 30 Avenue, Ft. Lauderdale, Florida 33312 | 305-937-2000 | www.GovComm.us | [email protected]
© GovComm, Inc. 2018
2
Thank you for purchasing GovComm’s network ITS Camera product. If there are any technical or
general questions, concerns or requests, please contact us through our website www.GovComm.us, by
email Sales@ GovComm.us or by telephone 1+305-937-2000.
This manual may contain several technical or printing errors, and the content is subject to change
without notice. We regularly improve and update our products and procedures described in the manual.
Updates will be added to new versions of this manual and posted onto the GovComm website.
DISCLAIMER STATEMENT
“Underwriters Laboratories, Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested for fire, shock or casualty
hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover
the performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.”
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings:
Serious injury or death may occur if any of the warnings are neglected.
Cautions:
Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
Follow these safeguards to prevent
serious injury or death.
Cautions
Follow these precautions to prevent
potential injury or material damage.
• Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
• In the use of the product, you must be in strict compliance with the electrical safety regulations of the
region and nation. Please refer to technical specifications for detailed information.
• Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source
with 24 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
• Do not connect several devices to one power adapter as adapter overload may cause over-heating
or a fire hazard.
Warnings
