EN
16
Troubleshooting
If the device stops working properly,
fi
rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause / solution
The device does not
work.
• Is the plug inserted in the plug socket correctly?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of your mains connection.
• Has the device been assembled correctly? Check whether
the cutting insert is seated on the drive shaft correctly.
• Is the device switched on? Press the On/Off switch.
Technical Data
Product numbers:
–
Z 00166 (green-gold)
–
Z 09349 (white-gold)
Model:
FS
996
Voltage supply:
220 - 240 V AC, 50 Hz
Output:
100
W
Safety class:
II
Short-time operation:
5 minutes
Slice thickness:
0 – 15 mm
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices.
You can obtain more information from your local authorities
.
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The
cost varies depending on the
service provider.)
All rights reserved.
