EN
26
With the
Erhitzen
(heating) programme, the contents of the soup mixing con-
tainer (
3
) are puréed and slowly heated, for 8 minutes. The temperature that is
reached after these 8 minutes depends on the starting temperature of the ingre-
dients. The recommendations are therefore:
•
do not use any frozen foodstuffs,
• precook
potatoes,
•
use warm water and also heated ingredients if applicable,
•
do not abort the
Erhitzen
(heating) programme prematurely. It is possible
that the desired temperature will then not yet have been reached.
1. Place the motor unit (
5
) on a work surface:
– This must be dry, clean,
fl
at and not heatable.
– The suction feet (
8
) must stick to it
fi
rmly.
– Make sure that there is a suf
fi
cient gap from the edge of the work surface so that
the device does not fall off during operation.
– Moreover, there should be clear space above (towards wall-mounted cupboards
and shelves) and to the sides in order to prevent any possible damage from hot
steam escaping.
2. Screw the blade attachment for soup mixing container (
4
)
fi
rmly to the bottom of the
soup mixing container (
3
).
3. Place the soup mixing container (
3
) with the blade attachment
for soup mixing container (
4
) onto the motor unit (
5
) and twist
it clockwise to secure it in place. Pay attention to the arrow
markings!
4. Remove the lid (
2
) and pour in the ingredients you want
(do not
exceed the MAX marking in the shaker!).
5. Put the lid (
2
) on.
6. Insert the mains plug into a properly installed plug socket that
is easily accessible.
7. Switch on the device: Press the
Start / Stopp
(start/stop) button
(
C
) once. The operating lamp (
7
)
fl
ashes and the display (
A
)
switches on.
8. Select the
Erhitzen
(heating) programme. To do this, press the
Funktion
(function)
button (
B
) until the arrow on the display (
A
) points to
Erhitzen
(heating).
9. Start the programme: Hold the motor unit (
5
) securely with one hand and press the
Start / Stopp
(start/stop) button (
C
) once.
10. If additional food is to be added during processing, twist the shaker (
1
) in the lid (
2
)
and then remove it upwards. Add ingredients through the opening in the lid.
11. When the programme is
fi
nished, switch off the device. Press the
Start / Stopp
(start/
stop) button (
C
) once to do this. The operating lamp (
7
) and the display (
A
) will go out.
12. Remove the mains plug from the plug socket.
13. Wait until the blades have come to a complete standstill, then twist the blade attach-
ment (
4
) with the soup mixing container (
3
) anticlockwise and detach from the motor
unit (
5
).
14. Transfer the food from the soup mixing container (
3
) into a suitable vessel.
